INSTALLATION Notes for "AREA DATA CONSOLIDATION EXPORT" 1.0 Patch 1.
=========================================================================
         PREFIX: BXP 
CURRENT VERSION: 1.0
         PATCH : 1 
=========================================================================
************ NOTE *******NOTE*******NOTE********** NOTE ***************** 
READ ENTIRE CHAPTER PRIOR TO ATTEMPTING ANY INSTALLATION!!! 
************ NOTE *******NOTE*******NOTE********** NOTE ***************** 
1.  GENERAL INFORMATION
 
     a) Print all notes/readme files.
 
     b) It is recommended that the terminal output during the installation be
        captured using an auxport printer attached to the terminal at which the
        software installation is being performed. This will ensure a printed
        audit trail if any problems should arise. A log file
        (PWD) that captures the install activities at the UNIX level.

     c) Description of changes in this patch:

         (1) Script bapc.script was added to allow the transfer of APC data Via
             the BXP System from the Area Offices to the Data Warehouse at NPIRS
             located in Albuquerque New Mexico.

         (2) Script bapc.awk was added to verify APC data integrity and give
             accurate counts of APC data transferred to the Data Warehouse 
             at NPIRS for accurate accountability.

         (3) Script bxpmenu.1 was modified to allow the transfer of APC data
             Via the BXP System from the Areas to the Data Warehouse at NPIRS 
             located in Albuquerque New Mexico.

         (4) Script bxpmenu.2 was modified to allow the transfer of APC data
             Via the BXP System from the Areas to the Data Warehouse at NPIRS
             located in Albuquerque New Mexico.

         (5) Script bxpmenu.3 was modified to identify Data Transmission Files
             with Zero Data content and thus not transmit empty files to NPIRS. 

2.  Contents Of Distribution 

     a) bxp_0100.01n    Installation Notes file 
     b) bxp_0100.01us   File containing UNIX scripts 

3.  Requirements 

     a) Kernel V. 8.0 or later 
     b) BXP V1.0

4.  INSTALLATION INSTRUCTIONS 

    At Host Operating System (Unix) Level: 

     a) Move bxp_0100.01us to the PUBLIC Directory of the System
        (usr/spool/uucppublic). If not already in the public directory.
   
     b) At the UNIX prompt, type: tar xvf bxp_0100.01us
        This will untar the file contents: 
           1. bxpmenu.1      4. bapc.awk
           2. bxpmenu.2      5. bapc.script
           3. bxpmenu.3      6. bxp_0100.01install
 
     NOTE: The user should be the one that will be doing the BXP exports to
     ensure proper permissions are passed through when the application is
     executed in a run-time environment. Using the ROOT account is HIGHLY
     discouraged. 

     c) At the prompt enter: ./bxp_0100.01install 

     d) This script will install the BXP Patch scripts in their appropriate
        directories listed below:

          .../BXP/bin.     ex: (.../BXP/bin/bapc.awk)
          .../BXP/scripts. ex: (.../BXP/scripts/bapc.script)
 
     If the install script does not run to completion, correct the problem
     and simply run it again. The most likely problem would be incorrect
     directory permissions.
      
     e)  Once installation is completed and correct you may delete the
         following files from the Public Directory:
             1. bxpmenu.1      4. bapc.awk           7. bxp_0100.01us
             2. bxpmenu.2      5. bapc.script        8. bxp_0100.01n
             3. bxpmenu.3      6. bxp_0100.01install

5.  POINT OF CONTACT 

    ITSC Support Desk 
    Applications Software Development and Support Team 
    Phone: 505-248-4371 
    or 888-830-7280 
    Fax: 505-248-4199 
    Web: http://www.rpms.ihs.gov/TechSupp.asp 
    E:-mail: ITSCHelp@ihs.mail.gov