INSTALLATION NOTES FOR IHS LABORATORY SERVICE PATCH 1035 KIDS FORMAT 
======================================================================
PREFIX:  LR, LA, and BLR
CURRENT VERSION: 5.2 KIDS PATCH 1035
RELEASE DATE: Sept 2015
======================================================================

*****~NOTE~***~NOTE~***~NOTE~***~NOTE~***~NOTE~***~NOTE~***~NOTE~*****
**********************************************************************
**                                                                  **
**  Read the ENTIRE notes file before attempting any installation!  **
**                                                                  **
**  All LAB users must be logged off before installing this patch.  **
**                                                                  **
**  All other users may stay logged on during the installation of   **
**  this patch.                                                     **
**                                                                  **
**********************************************************************
*****~NOTE~***~NOTE~***~NOTE~***~NOTE~***~NOTE~***~NOTE~***~NOTE~*****


1. GENERAL INFORMATION

   a). It is  generally considered a "best practice" to perform an in-
       stallation in a  "Test system" prior to  installing software in
       production.

   b). All  LAB  Users must be logged out of the Lab module due to the
       changes brought about by this patch.

   c). Print all notes/readme files.

   d). This patch IS NOT cumulative; i.e., all lab patches in sequence
       up through and including  LR*5.2*1034  must be installed before
       installing this patch.

   e). If  <EDIT>  errors occur during the install, the patch will NOT
       have been installed  correctly.   The patch will need to be re-
       installed.

   f). It is recommended that  the terminal output during installation
       be captured.  This will ensure a printed audit trail will exist
       if any problems should arise.

   g). This install will take approximately 2 minutes to install.


2. CONTENTS OF DISTRIBUTION

   a). lr__0520.35n            Notes file for installation of this patch.
   b). lr__0520.35k            KIDS Build file
   c). lr__0520.35ob           Example installation process
     

3. REQUIREMENTS

        Lab Service Patch 1034                   [LR*5.2*1034]


4. INSTALLATION INSTRUCTIONS

   a). Log in as system manager and go to programmer mode.

   b). D ^XUP and choose the XPD MAIN option,  the KERNEL INSTALLATION
       AND DISTRIBUTION main menu option.

   c). Choose INSTALLATION, and LOAD the KIDS patch lr__0520.35k file.

       **********************************************************
       ********************* IMPORTANT NOTE *********************
       **                                                      **
       ** The patch will  *ONLY*  install if the answer to the **
       **                                                      **
       **    Has a >> SUCCESSFUL << backup been performed?     **
       **                                                      **
       ** question is  YES  after the INSTALL  option has been **
       ** selected.   If  not, the install aborts and then the **
       ** RESTART and not the  INSTALL  option will have to be **
       ** used to  continue the install (unless the patch is   **
       ** UNLOADed).                                           **
       **                                                      **
       ********************* IMPORTANT NOTE *********************
       **********************************************************

   d). Install the patch, choosing LR*5.2*1035. See example process in
       file lr__0520.35ob

   e). Exit back to the programmer prompt.

   f). Installation complete.


5. INSTALLATION NOTES

   a). If doing  multiple  installs, you must say  YES  to accept the
       reinstallation of the Patch.

   b). Other than the over-riding the NO prompts for re-installation,
       it is necessary  to accept most default prompts during the in-
       stall, except enter  NO  at the  Want KIDS to  INHIBIT  LOGONs
       install prompt.

   c). Environment Errors

       The only environment issue the BLRPRE35 routine will examine is
       if the LR*5.2*1034 has been installed.   If the LR*5.2*1034 has
       not been installed, the  routine  will output something similar
       to the following:

       *****************************************************************

                         Site: IHS TEST Database UCI

       Install Aborting due to the following Systems Environment issue:

       >>>>> LAB SERVICE 5.2 (LR) & Patch 1034 WAS NOT installed! <<<<<<

                     Please print/capture this screen and
                         notify the Support Center at

                                1-888-830-7280.

       *****************************************************************

   d). A detailed  listing of  an example  install of  LR*5.2*1035  is
       in file lr__0520.35ob


6. POST INSTALLATION INSTRUCTIONS/NOTES

   a.) None.


7. DOCUMENTATION NOTE

   This patch is a  maintenance  patch for the  LAB SERVICE  module of
   RPMS. Issues found during the rollout of LR*5.2*1034 are addressed.

   There is  no change to  the  documentation  for  LR*5.2*1034.

   The corrected issues are:

   a). Adding a test to an accession will  not cause the user to enter
       the Clinical Indication process if valid data have been entered
       previously.

   b). Cancelling an order during the Clinical Indication process will
       update the status of the OERR entry in file 100 from PENDING to
       DISCONTINUED.

   c). The completed date/time on Interim Reports will print.

   d). Tests with an Accession Area of SENDOUT, but are not not mapped
       to a Reference Lab test, will not print a shipping manifest.

   e). When using Multi-Purpose accessioning, with multiple tests with 
       multiple  collection samples, valid Reference Ranges  and units
       will display in the EHR tab.


8. The following are the routines included in this patch:

    Routine   Description
    --------  ----------------------------------------------------   
    BLR35PST  IHS Lab Patch LR*5.2*1035 Post Routine
    BLR7OB1   Update an Order's OERR Status Flag
    BLRKIDS2  IHS Lab KIDS utilities, part 2
    BLRPRE35  IHS Lab Patch LR*5.2*1035 Pre/Environment Routine
    BLRRLEDI  BLR REFERENCE LAB LEDI UTILITIES
    BLRRLEVT  BLR Reference Lab Event
    BLRRLHL2  BLR HL7 Utilities for Reference Lab, part 2
    BLRRLMV   BLR View/Refile Raw Reference Lab Messages
    BLRRLU    BLR Reference Lab Utilities
    BLRSGNS2  IHS Lab SiGN or Symptom debug, part 2
    BLRSGNS3  Delete Order even though in SiGN or SYmptom Process
              (Continued)
    BLRSGNSP  Delete Order even though in SiGN or SYmptom Process
    BLRSGNSU  IHS Lab SiGN or SYmptom Utilities
    BLRSGNSY  IHS Lab SiGN or SYmptom
    BLRUTIL4  MISC IHS LAB UTILITIES (Cont)
    BLRUTIL6  MISC IHS LAB UTILITIES (Cont)
    BLRUTIL7  MISC IHS LAB UTILITIES (Cont)
    LROE      LAB ORDER ENTRY AND ACCESSION
    LRORDST   SET THE ORDER AND ACCESSION
    LRWLST1   ACCESSION SETUP
    LRWLST11  ACCESSION SETUP


9. SUPPORT CONTACT

   If you have  any  questions/comments  regarding this  distribution,
   please contact the OIT Help Desk by:

            Phone: (888) 830-7280

              Web:  http://www.ihs.gov/Helpdesk/

            Email: support@ihs.gov