INSTALLATION NOTES FOR MAS  PATCH 6
==========================================================================
 PREFIX: MAS*, DG*, DPT*, SD*, ADG*, VA*, OR*, ASD*
 CURRENT VERSION: 5.0
==========================================================================
**** NOTE **** NOTE **** NOTE **** NOTE **** NOTE **** NOTE **** NOTE ****
**************************************************************************
*    READ THE ENTIRE NOTES FILE PRIOR TO ATTEMPTING ANY INSTALLATION !!! *
**************************************************************************
**** NOTE **** NOTE **** NOTE **** NOTE **** NOTE **** NOTE **** NOTE ****

1.  GENERAL INFORMATION
 
    a)  Print all notes/readme files.
 
    b) It is recommended that the terminal output during the installation be 
       captured using an auxport printer attached to the terminal at which you 
       are performing the software installation.  This will insure a printed
       audit trail if any problems should arise.

Here's a description of the modifications included in this patch. 

ROUTINE/BUG FIXES

-  ADGSRVP - HSA-202 REPORT - A problem with inter-service transfers
   were not being displayed properly in section 1 of the M202 Report.

2. CONTENTS OF DISTRIBUTION

   mas_0500.06k         - 	 Kids Installation File including
                                 MAS patches 1,2,3,4,5 routines)

   mas_0500.06n	        -      	 This document
 

3. REQUIREMENTS

   a) MAS version 5.0

   b) The following patches MUST be installed before loading this patch!!
   
      mas_0500.04n - (Requires IHS Patient Reg patch ag__0600.04)
      mas_0500.05n - (Requires IHS Dictionaries patch aupn9910.04)

4. INSTALLATION INSTRUCTIONS

   In all UCI's running the MAS (ADT and SCHEDULING) package:

   a) Ensure all MAS users are logged off.  No need to disable logins.

   b) Do a routine save of the following routines:

      ASD*
      SD*
      ADG*
      DPT*
      VA*
      DG*
      (Note:  Remove this save from the system 7-10 days after this
              installation if no problems noted with new install)
 
   c) Install the software using the Kernel V. 8.0 Kernel Installation and Dis-
      tribution System menu while logged into your account in programmer mode.
      Once you start the install, you must let it run to completion!

 I N S T A L L A T I O N   E X A M P L E

>D ^XUP

Setting up programmer environment
Terminal Type set to: C-VT100

Select OPTION NAME: XPD MAIN       Kernel Installation & Distribution System

          Edits and Distribution ...
          Utilities ...
          Installation ...

Select Kernel Installation & Distribution System Option: INstallation

   1      Load a Distribution
   2      Verify Checksums in Transport Global
   3      Print Transport Global
   4      Compare Transport Global to Current System
   5      Backup a Transport Global
   6      Install Package(s)
          Restart Install of Package(s)
          Unload a Distribution


Select Installation Option: LOAD a Distribution
Enter a Host File: directory path name/mas_0500.06k

KIDS Distribution saved on Nov 01, 1998@18:31:57
Comment: MAS PATCH #6 including patches 1 - 5 routines only!

This Distribution contains Transport Globals for the following Package(s):
     MAS*5.0*6

Want to Continue with Load? YES// <Enter>
Loading Distribution...

Want to RUN the Environment Check Routine? YES// NO [Respond NO at this prompt.]
     MAS*5.0*6
Use INSTALL NAME: MAS*5.0*6 to install this Distribution.

Select Installation Option: INSTall Package(s)
Select INSTALL NAME: MAS*5.0*6     Loaded from Distribution  11/01/00@18:37:59
     => MAS PATCH #6 including patches 1 - 5 ;Created on Nov 01, 2000@18:31:57

 This Distribution was loaded on Nov 01, 2000@18:37:59 with header of
 MAS PATCH #6 including patches 1 - 5  ;Created on Nov 01, 2000@18:31:57
 It consisted of the following Install(s):
 MAS*5.0*6

    MAS*5.0*6

Install Question for MAS*5.0*6

Want to DISABLE Scheduled Options, Menu Options, and Protocols? YES// NO
Want to MOVE routines to other CPUs? NO//  NO

Enter the Device you want to print the Install messages.
You can queue the install by enter a 'Q' at the device prompt.
Enter a '^' to abort the install.

DEVICE: [Select Print Device]

                             MAS*5.0*6
------------------------------------------------------------------------
 Install Started for MAS*5.0*6:
               Nov 01, 2000@14:54:13

 Installing Routines:
               Nov 01, 2000@14:54:15

 Updating Routine file...

 Updating KIDS files...

MAS*5.0*6 Installed.

              Nov 01,2000@14:54:34 
------------------------------------------------------------------------------
Install Completed 
 
5. POINT OF CONTACT
 
   EDGAR MOORE, DSD/OIRM/Albuquerque Development Center (505) 248-4357.